Watson-rc9206-manual-pdf

How to Use the Watson RC9206 Universal Remote Control

The Watson RC9206 is a universal remote control that can operate up to six devices, such as TV, DVD, VCR, SAT, AUX and CBL. It has a large code library that covers most brands and models of devices. It also has a learning function that allows you to copy commands from your original remotes. In this article, we will show you how to set up and use the Watson RC9206 universal remote control.

Setting Up the Watson RC9206 Universal Remote Control

To set up the Watson RC9206 universal remote control, you need to find the code that corresponds to your device. You can use one of the following methods:

Manual code search: You can manually enter the code for your device using the keypad on the remote. You can find the code list in the user manual[^1^] or online[^2^].

Auto code search: You can let the remote automatically scan through all the codes until it finds the one that works for your device. This may take some time depending on the number of codes.

Learning function: You can use your original remote to teach the Watson RC9206 the commands for your device. You need to place both remotes face to face and press the buttons you want to copy.

To use any of these methods, you need to first select the device mode you want to program (TV, DVD, VCR, SAT, AUX or CBL) by pressing the corresponding button on the remote. Then follow these steps:

Manual code search:

Press and hold the SET button until the LED flashes twice.

Enter the four-digit code for your device using the keypad. The LED will flash once for each digit.

If the code is valid, the LED will flash twice. If not, it will flash four times and you need to try another code.

Test if the remote works with your device by pressing the POWER button or other buttons. If not, repeat steps a-c with another code.

Auto code search:

Press and hold the SET button until the LED flashes twice.

Press 9 9 1. The LED will flash twice.

Press 1 for TV, 2 for DVD, 3 for VCR, 4 for SAT, 5 for AUX or 6 for CBL. The LED will flash once.

Point the remote at your device and press the POWER button repeatedly until your device turns off or on.

Press and hold the SET button to save the code. The LED will flash twice.

Test if the remote works with your device by pressing other buttons. If not, repeat steps a-e.

Learning function:

Press and hold the SET button until the LED flashes twice.

Press 9 7 5. The LED will flash twice.

Select a device mode (TV, DVD, VCR, SAT, AUX or CBL) by pressing its button on the remote. The LED will flash once.

Select a button on the Watson RC9206 that you want to learn a command from your original remote.

Place both remotes face to face about 5 cm apart and press and hold the button on your original remote that you want to copy. The LED on the Watson RC9206 will flash once when it receives the signal.

Release both buttons and press any other button on the Watson RC9206 to confirm. The LED will flash twice.

Repeat steps d-f for other buttons you want to learn.

To exit learning mode, press and hold the SET button until the LED flashes twice.

Using the Watson RC9206 Universal Remote Control

To use the Watson RC9206 universal remote control, you need to select the device mode you want to control (TV, DVD, VCR 061ffe29dd