St1000lm024 Hn-m101mbb Windows 7 Driver
CLICK HERE >>> https://bytlly.com/2tz3Gj
How to Update the Firmware of Your ST1000LM024 HN-M101MBB Hard Drive for Windows 7
The ST1000LM024 HN-M101MBB is a 1 TB hard drive manufactured by Seagate that is commonly used in laptops and desktops. It has a SATA interface and a 5400 RPM speed. However, like any other hardware device, it may require firmware updates to improve its performance and reliability.
Firmware is a software program that controls the basic functions of a hardware device. It is stored in a non-volatile memory chip on the device and can be updated by the user. Firmware updates can fix bugs, enhance features, or increase compatibility with other devices or operating systems.
In this article, we will show you how to check if your ST1000LM024 HN-M101MBB hard drive needs a firmware update and how to download and install it on your Windows 7 computer.
Step 1: Check Your Hard Drive Model and Firmware Version
Before you proceed with the firmware update, you need to verify that your hard drive is indeed a ST1000LM024 HN-M101MBB model and what firmware version it currently has. To do this, you can use one of the following methods:
Use a third-party software tool such as SMARTHDD[^3^] that can display detailed information about your hard drive, including its model number and firmware version.
Use the Device Manager in Windows 7 to find your hard drive under the Disk drives category. Right-click on it and select Properties. Then go to the Details tab and select Hardware Ids from the drop-down menu. You should see a string that contains the model number and firmware version of your hard drive.
Use the BIOS or UEFI settings of your computer to access the information about your hard drive. Depending on your computer model, you may need to press a certain key (such as F2, F10, or Del) during the boot process to enter the BIOS or UEFI settings. Then look for an option that displays the hard drive information.
Once you have confirmed that your hard drive is a ST1000LM024 HN-M101MBB model, you need to check its firmware version. The latest firmware version for this model is 2BA30003[^1^], which was released by Seagate in June 2014. If your hard drive has an older firmware version (such as 2AR10001[^3^]), you may benefit from updating it to the latest one.
Step 2: Download the Firmware Update File
If you have decided to update your hard drive firmware, you need to download the firmware update file from Seagate's website[^2^]. To do this, follow these steps:
Go to https://www.seagate.com/as/en/support/kb/firmware-updates-for-seagate-products-207931en/
Scroll down to the section titled "Firmware Updates for Seagate Products" and click on the link that says "Click here to use the Download Finder."
Enter your hard drive model number (ST1000LM024) in the search box and click on Search.
Select your hard drive from the list of results and click on Download.
Save the file (Dell_2BA30003 Patch.zipx) to your computer.
Note: The firmware update file is provided by Dell, but it is compatible with any ST1000LM024 HN-M101MBB hard drive regardless of the computer brand.
Step 3: Extract and Run the Firmware Update File
After you have downloaded the firmware update file, you need to extract it and run it on your computer. To do this, follow these steps:
Locate the file (Dell_2BA30003 Patch.zipx) on your computer and right-click on it. Select Extract All from the menu.
Select a destination folder for the extracted files and click on Extract.
Open 061ffe29dd