Samsung S3850 Multiloader V5.65 206

How to Flash Samsung S3850 with Multiloader v5.65

If you have a Samsung S3850 phone that is stuck on the logo screen or has software issues, you may want to flash it with a new firmware using Multiloader v5.65. Multiloader is a tool that can flash Samsung Bada OS phones with different firmware files. In this article, we will show you how to use Multiloader v5.65 to flash your Samsung S3850 phone.

What You Need

Before you start, make sure you have the following things ready:

A Samsung S3850 phone with a charged battery.

A USB cable that can connect your phone to your computer.

A computer with Windows OS and Samsung USB drivers installed.

Multiloader v5.65 software, which you can download from here [^2^].

A firmware file for your Samsung S3850 phone, which you can find from various sources online. Make sure the firmware file matches your phone model and region.

How to Flash

Once you have everything ready, follow these steps to flash your Samsung S3850 phone with Multiloader v5.65:

Backup your data on your phone, as flashing will erase everything on your phone memory.

Turn off your phone and remove the SIM card and memory card.

Press and hold the Volume Down + Camera + Power buttons simultaneously until you see a yellow screen with \"Download\" written on it. This will put your phone in download mode.

Connect your phone to your computer using the USB cable.

Run Multiloader v5.65 as administrator on your computer.

Select BRCM2133 as the chipset type and check Full Download option.

Click Boot and select the Bootfiles folder from the firmware file you downloaded.

Click Apps and select the Apps_compressed.bin file from the firmware file you downloaded.

Click Rsrc1 and select the Rsrc_S3850_Open_Europe_Common.rc1 file from the firmware file you downloaded.

Click Rsrc2 and select the Rsrc2_S3850(Low).rc2 file from the firmware file you downloaded.

Click Factory FS and select the FactoryFs_S3850_Open_Europe_Common.ffs file from the firmware file you downloaded.

Click CSC and select the CSC_S3850_Open_Europe_Common_OXA_KD1.csc file from the firmware file you downloaded.

Click SHP APP and select the ShpApp.app file from the firmware file you downloaded.

Click FOTA and select the bplib_S3850OpenEur.fota file from the firmware file you downloaded.

Click Port Search and wait for Multiloader to detect your phone.

Click Download and wait for Multiloader to flash your phone. Do not disconnect your phone or turn off your computer during this process.

When Multiloader shows \"All files complete\", disconnect your phone and turn it on.

Congratulations! You have successfully flashed your Samsung S3850 phone with Multiloader v5.65. Enjoy your new firmware! 061ffe29dd