IATKOS ML3U (Mountain Lion 10.8.3 UEFI PC).zip
Click Here ===> https://urllie.com/2tzJZI
How to Install iATKOS ML3U (Mountain Lion 10.8.3 UEFI PC).zip on Your PC
If you want to run Mac OS X on your PC, you might have heard of iATKOS ML3U, a Hackintosh distro that supports UEFI PCs. UEFI is a newer firmware interface that replaces BIOS and allows for faster booting and more features. iATKOS ML3U is based on Mac OS X 10.8.3 Mountain Lion and comes with many drivers and patches to make it compatible with a wide range of hardware.
In this article, we will show you how to download and install iATKOS ML3U on your PC using a USB flash drive. You will need a PC with UEFI support, a 8GB or larger USB flash drive, and a working internet connection. You will also need to backup your data and create a partition for Mac OS X on your hard drive.
Step 1: Download iATKOS ML3U
The first step is to download the iATKOS ML3U zip file from the internet. You can find it on various torrent sites or file hosting services. The file size is about 5GB, so it might take some time depending on your internet speed. Make sure you download the file from a trusted source and verify its checksum to avoid any corrupted or malicious files.
One possible source for downloading iATKOS ML3U is the Internet Archive[^1^], where you can find the original torrent file uploaded by the iATKOS team. You can use any torrent client to download the zip file from there.
Step 2: Prepare the USB flash drive
The next step is to format and restore the USB flash drive with the iATKOS ML3U image. You will need a Windows PC for this step, as you will need to use a software called TransMac to write the image to the USB flash drive.
TransMac is a free software that allows you to access Mac disks and files from Windows. You can download it from its official website[^2^] and install it on your PC. After installing TransMac, run it as administrator and insert your USB flash drive into your PC.
In TransMac, right-click on your USB flash drive and select "Format Disk for Mac". This will erase all the data on your USB flash drive and format it as HFS+, which is the Mac file system. Then, right-click on your USB flash drive again and select "Restore with Disk Image". Browse to the location where you saved the iATKOS ML3U zip file and select it. TransMac will ask you to confirm the operation and then start writing the image to your USB flash drive. This might take some time depending on your USB speed.
When TransMac finishes writing the image, you can safely eject your USB flash drive from your PC. You have now created a bootable iATKOS ML3U installer on your USB flash drive.
Step 3: Install iATKOS ML3U
The final step is to install iATKOS ML3U on your PC using the USB flash drive. You will need to boot from the USB flash drive and follow the installation wizard.
Before you boot from the USB flash drive, make sure you have created a partition for Mac OS X on your hard drive. You can use any partitioning software such as Disk Management in Windows or GParted in Linux to create an empty partition with at least 20GB of space. Format the partition as FAT32 or NTFS, as you will reformat it later during the installation.
Also, make sure you have enabled UEFI mode in your BIOS settings. UEFI mode is usually found under Boot Options or Advanced Settings in your BIOS menu. If you don't see UEFI mode, it means your PC does not support it and you cannot use iATKOS ML3U.
After you have prepared your hard drive and BIOS settings, insert your USB flash drive into your PC and restart it. Press F12 or another key depending on your PC model to access the boot menu and select your USB flash drive as the boot device. You 061ffe29dd