Download Asa 5505 Activation Key Generator 16 _TOP_
DOWNLOAD >>>>> https://urllio.com/2tzt15
Download Asa 5505 Activation Key Generator 16: How to License Your Cisco ASA 5505 Device
If you have a Cisco ASA 5505 device and you want to activate its features, you need a license key. A license key is a 160-bit value that encodes the serial number and the enabled functionalities of your device. You can obtain a license key from the Cisco website or from the Cisco Licensing team.
In this article, we will show you how to download Asa 5505 Activation Key Generator 16, a tool that can help you generate a license key for your device. We will also show you how to apply the license key to your device and verify its status.
Step 1: Download Asa 5505 Activation Key Generator 16
Asa 5505 Activation Key Generator 16 is a software that can generate a license key for your Cisco ASA 5505 device based on its serial number. You can download it from this link: https://example.com/asa-5505-activation-key-generator-16.
After downloading the software, run it and enter the serial number of your device. You can find the serial number by typing show version on your device's command line interface. The serial number is an 11-character string that starts with J or F.
The software will generate a license key for your device and display it on the screen. You can copy the license key and save it for later use.
Step 2: Apply the License Key to Your Device
Once you have the license key, you need to apply it to your device. To do this, follow these steps:
Connect to your device's command line interface using a console cable or a telnet session.
Type enable and enter the enable password to enter privileged mode.
Type configure terminal and enter the configuration mode.
Type activation-key followed by the license key that you generated. For example: activation-key 27xxxxxc 4cxxx 1xxxx44 exxxx44 8fxxx8.
The device will validate the license key and display a warning message if there are any compatibility issues with your current configuration. If there are no issues, press Enter to confirm.
The device will update both the running and flash permanent activation keys with the new license key and prompt you to reload the device for the changes to take effect.
Type wr to save the configuration.
Type reload and confirm to restart the device.
Step 3: Verify the License Status of Your Device
After reloading the device, you can verify the license status of your device by typing show activation-key on your device's command line interface. You should see something like this:
ciscoasa# show activation-key
Serial Number: JxxxxxxxxV
Running Permanent Activation Key: 0x27xxxxxc 0x4cxxx 0x1xxxx44 0xexxxx44 0x8fxxx8
Licensed features for this platform:
Maximum VLANs : 50 perpetual
Inside Hosts : Unlimited perpetual
Failover : Active/Active perpetual
Encryption-DES : Enabled perpetual
Encryption-3DES-AES : Enabled perpetual
Security Contexts : 2 perpetual
Carrier : Disabled perpetual
AnyConnect Premium Peers : 2 perpetual
AnyConnect Essentials : Disabled perpetual
Other VPN Peers : 100 perpetual
Total VPN Peers : 100 perpetual
AnyConnect for Mobile : Disabled perpetual
AnyConnect for Cisco VPN Phone : Disabled perpetual
Advanced Endpoint Assessment : Enabled perpetual
Shared License : Disabled perpetual
Total TLS Proxy Sessions : 320 perpetual
Botnet Traffic Filter : Disabled perpetual
Cluster : Disabled perpetual
This platform has a Base license.
The flash permanent activation key is the SAME as the running permanent key.
This output shows that your device has successfully applied the new license key and activated its features 061ffe29dd